• <button id="uem27"><tr id="uem27"><kbd id="uem27"></kbd></tr></button>

    <em id="uem27"><ruby id="uem27"><u id="uem27"></u></ruby></em>
    <dd id="uem27"><track id="uem27"></track></dd>
  • <th id="uem27"></th>
    <th id="uem27"></th>
    1. <li id="uem27"></li>

      歡迎訪問南京東頂新材料科技有限公司官網!

      南京東頂新材料科技有限公司

      運營中心: 江蘇省南京市溧水區開發區團山西路
      電話: 025-57201133
      郵箱:
      NJDD2003@163.com

      微信二維碼

      Copyright 2019?南京東頂新材料科技有限公司版權所有

      蘇ICP備18018706號-1       網站建設:中企動力南京

      Nanjing Dongding Chemical Co., Ltd.

      >
      產品詳細
      瀏覽量
      產品名稱

      ZBS52-12脂肪族丙烯酸聚氨酯面漆

      概要信息
      數量
      -
      +
      沒有此類產品
      產品描述

      產品說明 Description

      以脂肪族聚氨酯樹脂為基料,加入顏料、助劑、填料、溶劑等組成。分甲、乙雙組份包裝。

      It uses aliphatic polyurethane resin as base materials, mixing with pigments, auxiliaries, fillers, solvent etc.. The product is a two-component packaging.

       

      特 性 Properties

      該油漆具有良好的物理機械性能,附著力強、硬度高,漆膜防腐性能優異。耐濕熱、耐鹽霧、保光、保色性突出??稍诔睗?、化工、污染、海洋大氣環境下使用,不宜于浸漬環境。

      This product has good physical and mechanical properties. It has strong adhesive forces, high hardness, and excellent corrosion-resisting performance for its films. Also, it has outstanding resistance to hot and humid and salt mist, and light and color protection, which is suitable for use in moisture, chemical, polluted and ocean environment or atmosphere. But it is not advisable for immersion environment.

       

      膜厚與涂布率Thickness of Film and Spreading Rate

       

       

      最低 Min.

      最高 Max.

      干膜厚度(微米)
      Thickness of Dry Film (μm)

      30

      60

      理論涂布率(平方米/公斤)
      Theoretical Spreading Rate (m2/kg)

      11.8

      5.9

       

      技術參數 Technical Parameter

      顏色 Color

      可按用戶選色卡配置 Custom order based on color chip

      體積固體份(%)Volume Solids (%)

      ≥60

      細度 Fineness,μm

      ≤50

      表 干 Surface Dry

      0.5小時(23±2℃,相對濕度50%±5)
      0.5 h (23±2℃,Relative Humidity:50%±5)

      實 干 Hard Dry

      24小時 (23±2℃,相對濕度50%±5)
      24h (23±2℃,Relative Humidity:50%±5)

      附著力 Adhesive Force

      1-2級 Grade1-2

      沖擊 Impact

      50mm

      柔韌性 Flexibility

      ≤2mm

      耐水性 Water Proof

      很好 Very Good

      耐磨性 Wear Resistance

      優異 Excellent

      耐人工加速老化性能
      Resistance to Artificial Ageing

      優異 Excellent

      耐化學性 Chemical Resistance

      優異  pH值范圍 6-10. Excellent PH Range: 6-10.

       

      表面處理 Surface Treatment

      所有待涂裝表面應當清潔、干燥且無油污等污物,表面應當按照國際標準ISO8504進行評估和處理。

      清潔度等級:噴砂清理至Sa 2 1/2(ISO 8501-1:2007)。

      粗糙度:使用合適的磨料(鋼丸/棱角砂)處理到符合國際標準ISO8503-2中規定的粗糙度等級的細至中等40-85微米。

      All surfaces should be clean, dry and no dirt such as grease, and should be examined and processed by ISO8504.

      Cleanliness: Clearing by sand blasting to achieve Sa 2 1/2 (ISO 8501-1:2007).

      Roughness: Using the appropriate grinding materials (steel shot/grit) for processing to achieve the standards in ISO8503-2 as fine to medium sizes 40-85μm

       

      施工條件 Application Conditions

      環境溫度:-5℃~35℃,底材溫度應當至少高于空氣露點溫度3℃,相對濕度小于85%,溫度和相對濕度的測量必須在靠近作業點附近的底材處進行。建議鋼材溫度為:30-40°C。

      Ambient Temperature: -5℃~35℃.The temperature of substrate materials should be 3℃ above the dew point, and relative humidity should be less than 85%. Temperature and relative humidity should be measured at the substrate materials near the coating areas.

       

      施工方式 Application Method

       

      噴涂 Spraying

      使用無氣噴涂或常規噴涂
      Airless spraying or normal spraying

      刷涂 Brushing

      推薦使用于修補。
      Recommended for mending and repairing.

       

      施工參數 Application Parameter

      混合比(重量)Mixture Ratio (Weight)

      甲組份(主漆):乙組份(固化劑)=20:4
      Component I (Paints):Component II (Curing Agent)= 20:4

      混合 Mixture Method

      使用動力攪拌器,在甲組份(主漆)中,邊攪拌,邊緩慢地添加入乙組分(固化劑),充分攪拌至混合均勻
      Use power blender to stir Component I (Paints), at the same time, slowly put Component II (Curing Agent) in for fully stirring till it is well-mixed.

      混合后使用壽命(23℃)
      Life Time after Mixture (23℃)

      8小時 (隨溫度升高而縮短).  4h (It will be shorten by rising temperature.)

      稀釋劑/清洗劑 Thinner/Cleaning Agent)

      無機硅酸鋅稀釋劑,加入量一般不超過涂料總量的20%
      Inorganic Zinc Silicate Thinner. Its amount should not be more than 20% of the totals of paints.

      無氣噴涂的指導性數據
      Instructive Data of Airless Spraying

       

      噴嘴壓力
      Pressure of Spray Orifice

      14-20 MPa

      噴嘴孔徑
      Spray Orifice Diameter

      0.38 - 0.58 mm

          噴幅 Spraying Range

      40 - 80o

      常規噴涂指導參數
      Instructive Parameter for General Spraying

       

      注意事項
      Attentions

      理論用量為依據參數計算得出,實際用量,依用戶的施工方法、噴涂工件的形狀、表面處理的工藝、膜厚等有較大差異。實際用量可參考本公司銷售工程師相關建議。
      本漆不可用于醇酸漆等耐溶劑性較差的油漆表面。
      如無特殊要求,本品一般為平光面漆。
      Theoretical amount is calculated based on parameters. Actual amount may be different because of the user’s application method, shape of the substrate materials, process for surface treatment, film thickness etc.. So it is advisable to have recommends of actual amount from our sales engineers for your references.
      This product is not suitable for the surfaces coating with alkyd paints which have poor resistance to solvent.
      This product is plain finishing paint if no special demand requires.

      典型油漆配套 前道配套用漆:環氧富鋅底漆、脂肪族丙烯酸改性中間漆等。

      根據具體情況可以制定其它配套。

      Preceding Coats Epoxy Zinc-rich Primer, Modified Aliphatic Acrylic Intermediate Paint etc.. Or match with other paints based on specific conditions.

      貯存 必須按照國家規定貯存,建議的貯存溫度為15 ~ 25°C 。

      應干燥并通風良好。包裝容器必須保持密閉。注意:閃點低。

      儲藏壽命:在室溫條件下儲存6個月。

      Storage The products must be stored as per national regulations. Storage temperature should be 15 ~ 25°C. Dry circumstances and good ventilation are required for storage area. Package must be tightly sealed. Storage Life: 6 months at room temperature.

       

      包裝規格 Packing Specification

      甲組份(主漆):20升容器裝20公斤,

      乙組份(固化劑): 5升容器裝4公斤。

      Component I (Paint): 20L Container, 20kg; Component II (Curing Agent): 5L Container , 4Kg.

       

      健康與安全 Health and Safety

      請注意包裝容器上的警告標識。在通風良好的條件下使用。避免吞咽或吸入漆霧。避免皮膚接觸,如果油漆濺在皮膚上應當立即用合適的清潔劑、肥皂和水清洗。濺入眼睛時應用清水充分沖洗并立即就醫診治。有關健康和安全的詳細資料及使用本產品的注意事項,請查閱本公司的“材料安全手冊”。

      Please notice the warning label on the package. Use the product at well-ventilated circumstances. To avoid swallowing or inhaling the paint mist. To avoid contacts with skin. If happens, immediately clean it away with appropriate cleanser, soap and water. If the product gets into the eyes, use clean water to wash and seek medical care immediately. For detailed information and notes for health and safety, please refer to our company’s Safety Manual for Products.

       

      聲明 Notes

      本說明有關數據是在實驗室取得,實際產品可能與之略有不同;

      以上數據如有改變,以本公司最新說明書為準,恕不另行通知。

      All data in this description is obtained in laboratory and slight variation may occur during actual use.The above specification and description are subject to the change without notice.

       

      以上最終解釋權歸南京東頂化工有限公司所有 

      未找到相應參數組,請于后臺屬性模板中添加
      暫未實現,敬請期待
      暫未實現,敬請期待
      上一篇
      下一篇
      亚洲va无码一区二区三区观看_91精品久久久久久中文字幕无码_日本不卡无码二区三区_国产对白老熟女正在播放
    2. <button id="uem27"><tr id="uem27"><kbd id="uem27"></kbd></tr></button>

      <em id="uem27"><ruby id="uem27"><u id="uem27"></u></ruby></em>
      <dd id="uem27"><track id="uem27"></track></dd>
    3. <th id="uem27"></th>
      <th id="uem27"></th>
      1. <li id="uem27"></li>